Optimization of mordenite membranes using sucrose precursor for pervaporation of water-ethanol mixtures

Abstract

Post-treated mordenite membranes were prepared using sucrose (C12H22O11) as a carbon precursor to block any pinholes and defects in the zeolite layer. The pervaporation (PV) process was used to separate ethanol from the water. The effects of the sucrose concentration and the py-rolysis temperature (650–850 °C) were investigated, and the resulting high separation performance compared to those post/pre-treated membranes was reported in the literature. In this study, mor-denite carbon membranes yielded a water/ethanol separation factor of 990.37 at a water flux of 9.10 g/m2h. The influence of the operating temperature on the performance of the membrane also was considered. It was concluded that the selective adsorption of water through zeolite pores was achieved. The entire preparation procedure was achieved using a rapid, low-cost preparation process.