Pico hydro or a small scale hydroelectric power plant is used as the rotating energy of the generator. Pico hydro is a hydroelectric power plant that has a power of less than 5 kW. Technically, Pico hydro has three main components namely water, turbine and generator. Turbine type propeller reaction has a special profile that causes a decrease in water pressure during the blades. This pressure difference exerts force on the blade so that the runner (rotating part of the turbine) can rotate. Permanent magnets are used to produce magnetic flux. Permanent magnets used are rare-eatrhrod magnet material, neodymium-iron-boron NdFeB with N35 type. The planned generator released is 36.85 V, 500 rpm, 50 hz. This designed water turbine has four blades which cannot change its angle. As for the measurement results produce a voltage of 35.1 V with a manufacturing efficiency of 95 %. Charging the battery voltage must be more than 12 V, therefore the generator must be turned at least 200 rpm with a voltage of 14 V to be used for charging batteries.
CITATION STYLE
Yohanes Setyawan, E., Ismail Nakhoda, Y., Uji Krismanto, A., Mustiadi, L., Yandri, E., & Burlakovs, J. (2020). Design and Construction of Single Phase Radial Flux Permanent Magnet Generators for Pico hydro Scale Power Plants Using Propeller Turbines in Water Pipes. In E3S Web of Conferences (Vol. 188). EDP Sciences. https://doi.org/10.1051/e3sconf/202018800006
Mendeley helps you to discover research relevant for your work.