The influence of different pre-treatments of concrete surface on the bond strength of geopolymer-type coating layer

Abstract

The treatment of concrete surface using more durable material is one way to slow down the damage process of material, which can negatively affect durability of construction. This paper is aimed at testing the geopolymer-type coating materials of different composition while placing emphasis on various techniques of surface pre-treatments of concrete to which they were applied. The main composition variables were as follows: the fly ash fineness (original, ground) and the addition of washing-aggregate sludge. Four compositions were tested and compared with the composition based on cement binder. The cement mixture was prepared using the same fillers. The following techniques of surface pre-treatment of concrete were applied: brushing, pressure washing, and pressure washing followed by penetration, together with non-treated surface being used for comparison. The effect of the surface treatment technique was tested through the adhesion strength, which was executed at 2, 7, 28, and 120 days after application of the coating. The influence of the composition of geopolymer coating material was also discussed. Geopolymer-based mixtures achieved better adhesive strength than the cement-based mixture, regardless of surface treatment technique. The addition of sludge microfiller seems to be beneficial in improving the adhesive strength of geopolymer-type coating material.