Asthma in tunnel workers exposed to synthetic resins

Abstract

Objectives. The prevalence of asthma among tunnel workers exposed to synthetic resins was studied by determining airway symptoms, methacholine responsiveness, and lung function. Methods. Nineteen injection workers were compared with a group of 104 other tunnel workers with similar exposure, except for that to synthetic resins. A questionnaire on respiratory symptoms, smoking habits, use of respiratory protection, and work tasks was used. Lung function was studied using a bellows spirometer. Bronchial reactivity was tested with methacholine. Allergy screening with Phadiatop and radioallergosorbent tests for toluene-diisocyanate-HSA, diphenylmethane-4.4-diisocyanate-HSA, and formaldehyde-HSA (HSA = human serum albumin) were carried out. Methylene diphenyl diisocyanate (MDI) and MDI prepolymer exposure was estimated by filter sampling, and the filters were analyzed by high-performance liquid chromatography. The most common work situations were simulated for an estimation of exposure to isocyanates. Results. The injection workers reported more respiratory symptoms than the reference group, and they had higher prevalences of bronchial hyperresponsiveness (37% versus 14%), asthma (26% versus 1%), and airflow limitation (37% versus 4%). Toluene-diisocyanate-HSA-specific immunoglobulin E antibodies were found in 2 of the 19 injection workers, but in none of the other tunnel workers. By simulation at a worksite, the average exposure to polymerized MDI was estimated to be 5.5-300 μg/m3 during injection work and 18-4300 μg/m3 during short-term exposure, the highest exposure occurring when cured polyurethane was ground. Conclusions. Exposure to partly decomposed MDI in tunnel work enhances the risk for respiratory symptoms, methacholine hyperresponsiveness, asthma, and airflow limitation.