Experimental Investigation on the Machinability of PCBN Chamfered Tool in Dry Turning of Gray Cast Iron

Abstract

Polycrystalline cubic boron nitride (PCBN) tools are widely used for hard machining of various ferrous materials. The edge structure of the PCBN cutting tool greatly affects the machining performance. In this paper, dry turning experiments were conducted on gray cast iron with a PCBN chamfered tool. Both the cutting temperature and the cutting force were measured, and then the surface quality and tool wear mechanisms were analyzed in detail. It was found that the cutting temperature and cutting force increased with the increase in feed rate, depth of cut, and cutting speed. The surface roughness firstly decreased, and then increased with an increase in feed rate. The minimum surface roughness was obtained with a feed rate of 0.15 mm/r which exceeded the tool chamfer width. The PCBN tool wear mode was mainly micro notches on the rake face and micro chipping on the tool chamfer, while the adhesion wear mechanism was the main tool wear mechanism.