Experiments were conducted on pure Fe2O3 fines (−250 mesh) which were mixed with 1, 2.5, 5 and 10% by weight of pure NiO of the same size. The powder mixtures were pressed into compacts and fired at 1 473 K for 20 h. The fired compacts were isothermally reduced at 1 173–1 473 K with hydrogen. The reduction course was followed up by means of weight loss technique. Porosity measurements, reflected light microscope and X-ray diffraction analysis were used to elucidate the reduction kinetics. NiO was found to have a significant effect on the reduction of iron oxide. The rate of reduction at both the initial and final stages increased with the increase of dopant content at all reduction temperatures and this was attributed to the formation of nickel ferrite (NiFe2O4) phase and the consequent increase in the total porosity of compacts. Nix′ Fey solid solution (ferronickel alloy) was produced during reduction at all temperatures studied. The values of apparent activation energy calculated from the experimental results, the structure of partially reduced compacts and the application of gas-solid reaction model were used to elucidate the reduction mechanism. © 1995, The Iron and Steel Institute of Japan. All rights reserved.
CITATION STYLE
Nasr, M. I., Omar, A. A., Khedr, M. H., & El-Geassy, A. A. (1995). Effect of Nickel Oxide Doping on the Kinetics and Mechanism of Iron Oxide Reduction. ISIJ International, 35(9), 1043–1049. https://doi.org/10.2355/isijinternational.35.1043
Mendeley helps you to discover research relevant for your work.