Quantification of rock joint roughness using terrestrial laser scanning

Abstract

Rock joint roughness characterization is often an important aspect of rock engineering projects. Various methods have been developed to describe the topography of the joint surface, for example Joint Roughness Coefficient (JRC) correlation charts or disc-clinometer measurements. The goal of this research is to evaluate the accuracy, precision and limits of Terrestrial Laser Scanning (TLS) for making remote measurements of large-scale rock joints. In order to find the most appropriate roughness parameterization method for TLS data and to analyse the capability of TLS for roughness estimation, experiments were made with a 20 × 30 cm joint sample. The sample was scanned with TLS and compared to reference measurements made with the Advanced TOpometric Sensor (ATOS) system. Analysis of two roughness parameterization methods, virtual compass and disc-clinometer, and angular threshold method, showed that the latter is less sensitive to noise. Comparative studies of ATOS and TLS roughness parameters indicate that the TLS can adequately quantify surface irregularities with a wavelength greater than 5 mm from a distance of 10 m.