A sulfonated polyethylene-styrene cation exchange membrane: a potential separator material in vanadium redox flow battery applications

Abstract

We report on the synthesis and characterization of a polyethylene-styrene-divinylbenzene-based interpolymer cation exchange membrane (ICEM) and its applicability as a separator in a vanadium redox flow battery (VRFB). The ICEM preparation involved radical co-polymerization of styrene-divinylbenzene in molten polyethylene and then blow film extrusion and sulfonation using chlorosulfonic acid. The crossover of vanadium ions across ICEM was studied in a charge balanced two-compartment cell and its efficacy was comparable to that of Nafion®117. Further study evaluated the chemical, dimensional, and mechanical stability in a highly oxidative environment of 2.1 M H2SO4 and 1.6 M VO2+ ions over 30 days at 50 °C. The VRFB performance exhibited 95% Coulombic, 63% energy, and 67% voltage efficiencies at 140 mA cm-2 over 100 charge/discharge cycles. The polarization curve indicated an operational power density of 310 W cm-2 at a limiting current density of 350 mA cm-2, revealing a low membrane resistivity. An asymmetric flow battery was set up to overcome VRFB capacity fading and operated at 100 mA cm-2. The study demonstrated the superiority of ICEM over Nafion®117 in terms of self-discharge and capacity retention under identical operational conditions. The findings of this study indicated long-term operational stability of ICEM and suitability in VRFB applications.