The purpose of this research is to determine the effect of heat treatment hardening of Al Mg Si - Fe12% casting aluminium alloys on wear. The tests were carried out on specimens of raw materials and heat-treated specimens with variations of temperature used were 550 o C, 575 o C, 600 o C, and 625 o C, and used 15 minutes of holding time in each heat treatment, then quenching in SAE 20 oil. The method used for wear-tested was high speed ogoshi universal testing machine wear. The result had shown on raw material a specific wear rate was 2.256102E-07 mm 2 /kg. Test results on the specimens that have received heat treatment hardening temperature 550 o C increased the wear value decreased to 1.7471E-07 mm 2 /kg. In materials with temperature heat treatment, 575 o C causes wear values were increased when compared with raw material, respectively, 2,83739E-07 mm 2 /kg. In materials with temperature heat treatment 600 o C also causes wear values were increased when compared with raw material, respectively, 2,65105E-07 mm 2 /kg. Test results on the test material that ha s received heat treatment temperature 625 o C increased the wear value decreased to 2.16777E-07 mm 2 /kg.
CITATION STYLE
Wardoyo, W., & Sumpena, S. (2018). Pengaruh Variasi Temperatur Quenching pada Aluminium Paduan AlMgSi-Fe12% terhadap Keausan. Jurnal Engine: Energi, Manufaktur, Dan Material, 2(1), 33. https://doi.org/10.30588/jeemm.v2i1.528
Mendeley helps you to discover research relevant for your work.