Hand self-wiping protocol for the investigation of lead exposure in the workplace

7Citations
Citations of this article
21Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

The purpose of this project was to develop and validate a hand wiping protocol to be used by occupational hygienists, scientists, or other competent persons, measuring skin exposure to lead in workplaces. Inadvertent lead ingestion is likely to occur once the hands of employees have become contaminated. Ideally, a hand wiping protocol should maximize the recovery of lead-based residues present on employees hands in a cost-effective and reproducible manner. This article describes an effective and practical hand wiping procedure.Here, two standardized protocols (A and B) are designed. Protocol A is a self-wiping protocol requiring employees to wipe their own hands using four separate and successive wipes. Protocol B involves a scientist wiping the hands of employees using four wipes, followed by employees self-wiping their hands using two wipes (total of six wipes). Both protocols are defined by four wipe passes over each hand using Ghost wipes.Because this study took place in the workplace rather than in a simulated laboratory environment, only the relative (i.e., not absolute) removal efficiencies of the hand wiping protocols have been assessed.The two protocols were first evaluated at a double glazing panel manufacturing site where between 248 g and 4544 g of lead was found on employees hands. A statistical analysis (t-test) on the mean relative lead levels recovered in the first parts of the protocols indicated that Protocol A was more efficient than Protocol B (73% for Protocol A vs. 65% for Protocol B). The relative recovery of the combined first two passes against the combined first three passes also confirmed the greater efficiency of Protocol A (83.3% for Protocol A vs. 76.5% for Protocol B). However, lead levels recovered on the fourth pass remain significant at more than 10% of the total recovered loadings. Nonetheless, Protocol A was preferred and further evaluated at a lead battery manufacturing site where between 149 g and 18,784 g of lead was found on employees hands.

Cite

CITATION STYLE

APA

Gorce, J. P., & Roff, M. (2015). Hand self-wiping protocol for the investigation of lead exposure in the workplace. Journal of Occupational and Environmental Hygiene, 12(10), 699–707. https://doi.org/10.1080/15459624.2015.1043052

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free