Shock wave induced cavitation of silicone oils

Abstract

The cavitation threshold of polydimethylsiloxane (silicone) oils was studied using the planar impact of flyer plates to generate large transient negative pressures within the liquids. The plate-impact experiments used a 64-mm-bore gas-gun to launch thin sabot-supported flyer plates onto liquid capsule targets in which a thin Mylar diaphragm formed a free surface at the back of the sample. The shock wave driven into the target capsule by the flyer impact placed the silicone oil in tension upon reflection from the rear free surface, eventually causing the sample to cavitate. The spall strength, or critical tension which cavitates the liquid, was determined by monitoring the free-surface velocity using a photonic Doppler velocimetry system. This study explored the effect of viscosity and loading strain rate on a system of three silicone oils having vastly different viscosities (4.8 × 10 - 2 Pa s to 2.9 × 10 1 Pa s), but otherwise similar properties. The spall strength was found to remain constant over the ranges of strain rate and viscosities probed in this work. A comparison of the experimental results to models for the cavitation threshold of liquids suggested that homogeneous nucleation of bubbles was the dominant mechanism for tension relief at the onset of cavitation.