Reactive metal coatings have been frequently used on ceramic materials for various purposes. However, little work was done in the past to understand the interactions between coating and ceramic substrates and their effects on the mechanical properties of the ceramics. In this study, titanium coatings were applied to single-crystal (sapphire) and polycrystalline alumina to study the interface reactions. Also, the effect of the coating on the mechanical properties of the substrates was quantified in terms of modulus of rupture (MOR) in four-point bending strength. Reactions between the coating and the Al2O3-based substrates at 980°C caused the formation of a new phase, Ti3Al[O], and a significant decrease (15%-65%) in the MOR strength of the ceramic materials. This study showed that in polycrystalline alumina, interactions between titanium and the glassy grain-boundary phase in the ceramic materials were responsible for reduction in the MOR strength, while the effect of thermal expansion mismatch between titanium and the ceramic substrate appeared to be dominant for singlecrystal alumina. © 1992 Chapman & Hall.
CITATION STYLE
Kang, S., & Selverian, J. H. (1992). Interactions between Ti and alumina-based ceramics. Journal of Materials Science, 27(16), 4536–4544. https://doi.org/10.1007/BF00541591
Mendeley helps you to discover research relevant for your work.