Experimental investigation of the effect of heat flux on the fire behavior of engineered wood samples

Abstract

This paper presents the experimental study results on the effect of heat flux emitted by a standard source on the charring and ignition characteristics of wood construction materials (plywood, chipboard, and oriented strand board) using infrared thermography (IRT) in the narrow spectral ranges of infrared wavelength. The time to ignition (TTI), charring rate and depth were obtained for the samples. In addition, the effect of several fire retardants on the charring rate and depth of the samples and TTI was analyzed. All fire retardants contribute to an increase in TTI, which confirms their main function—fire protection. However, the effect of fire retardants differs noticeably depending on the material. A new experimental technique is suggested, with the infrared imaging of the temperature distribution along the end of a sample under the heat flux effect on its frontal surface. The uniqueness of this approach consists in the registration of the entire process of ignition and combustion of the presented materials, which occurs in real time without contact with high spatial and temporal resolution. Using the infrared camera of the research class, it becomes possible to record the entire process from the occurrence of the temperature exposure region to the deep carbonized crater in the body of the material. The results can serve as additional recommendations in the development of fire hazard testing methods for construction materials and fire retardants.