Preparation of polyaniline/graphene coated wearable thermoelectric fabric using ultrasonic-assisted dip-coating method

17Citations
Citations of this article
33Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

Abstract: The use of thermoelectric fabrics for powering wearable devices is expected to become widespread soon. A thermoelectric fabric was prepared by coating nanocomposite of polyaniline/graphene nanosheets (PANI/GNS) on a fabric. Four samples of the fabric containing different wt% of GNS (0.5, 2.5, 5, and 10) were prepared. To characterize the samples, Fourier transform infrared (FTIR) spectra, attenuated total reflectance-Fourier transform infrared (AT-FTIR) spectra, field-emission scanning electron microscopy (FE-SEM), electrical conductivity and Seebeck coefficient measurements were used. The electrical conductivity increased from 0.0188 to 0.277 S cm−1 (from 0.5 to 10 wt% of the GNS in PANI/GNS nanocomposite). The maximum coefficient of Seebeck was 18 µV K−1 with 2.5 wt% GNS at 338 °C. The power factor improvement was from 2.047 to 3.084 μW m−1 K−2 (0.5–2.5 wt% GNS). Graphic abstract: [Figure not available: see fulltext.]

Cite

CITATION STYLE

APA

Amirabad, R., Ramazani Saadatabadi, A., & Siadati, M. H. (2020). Preparation of polyaniline/graphene coated wearable thermoelectric fabric using ultrasonic-assisted dip-coating method. Materials for Renewable and Sustainable Energy, 9(4). https://doi.org/10.1007/s40243-020-00181-7

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free