Gas adsorption in the porous shale matrix is critical for gas-in-place (GIP) evaluation and exploration. Adsorption investigations benefit significantly from the use of molecular simulation. However, modelling adsorption in a realistic shale topology remains a constraint, and there is a need to study the adsorption behaviour using molecular models containing both organic and inorganic nanopores. Most simulations use a single component, either kerogen (organic composition) and quartz or clay (inorganic composition), to represent the shale surface. In this work, the molecular dynamic (MD) and grand conical Monte Carlo (GCMC) simulations were utilised to provide insight into methane adsorption behaviour. Amorphous shale structures composed of kerogen and quartz were constructed. The kerogen content was varied to replicate the shale with 2 wt.% and 5 wt.% Total Organic Carbon (TOC) content with 5 nm pore size. The simulated densities of the shale structures showed consistent values with actual shale from the Montney, Antrim, and Eagle Ford formations, with 2.52 g/cm3 and 2.44 g/cm3, respectively. The Average Error Analysis (ARE) was used to assess the applicability of the proposed amorphous shale model to replicate the laboratory adsorption isotherm measurements of actual shale. The ARE function showed that the amorphous shale shows good agreement with experimental measurements of all Barnett shale samples with an average of 5.0% error and slightly higher for the Haynesville samples with 8.0% error. The differences between the experimental adsorption measurement and simulation resulted from the amorphous packing, and actual shales have more minerals than the simulated model.
CITATION STYLE
Mohd Aji, A. Q., Mohshim, D. F., Maulianda, B., & El-Raeis, K. A. (2023). Molecular Simulation Study on Methane Adsorption in Amorphous Shale Structure. Minerals, 13(2). https://doi.org/10.3390/min13020214
Mendeley helps you to discover research relevant for your work.