Prediction ot Mechanical Properties of Multi-phase Steels Based on Stress-Strain Curves

Abstract

An approach to predict mechanical properties of hot-rolled multi-phase steels referring to the stress-strain curves is proposed. Different from a conventional approach of regression analysis about the relationships between properties and chemical compositions and processing factors, a proposed one is based on the analysis and application of stress-strain curve: several commonlyused mechanical properties such as yield strength, tensile strength, uniform elongation, total elongation, work-hardening exponent (n) and Vickers hardness, are derived systematically from the stress-strain curve of a multi-phase steel, which is calculated by using concentration factor, i.e., strain partition ratio and stress-strain curves of constituent phases. Stress-strain curves of individual componentstructures such as ferrite, pearlite, bainite, and martensite are expressed by Swift's equation. Physical background of the concentration factor is discussed by examining theoretical models of deformation for two-phase materials. Evaluation of plastic relaxation related to microstructural topology might be the most difficult point of this approach and sometrials are presented. © 1992, The Iron and Steel Institute of Japan. All rights reserved.