Source treatment of acid mine drainage at a backfilled coal mine using remote sensing and biogeochemistry

Abstract

A biological source treatment (BST) technique using remote sensing and biogeochemistry has been developed to address acid mine drainage (AMD) at its source. The BST technique utilizes down-hole injections of microbial inoculum and substrate amendments to establish a biofilm on the surface of metal sulfides (AMD source material). The treatment results in an elevated groundwater pH (from acidic to circum-neutral levels) and prevents further oxidation of AMD source material. The first 2 years of an ongoing field study of the BST technique at a reclaimed coal mine in central Tennessee (USA) has produced successful results. For instance, the water chemistry in a monitoring well down-gradient from injection wells has improved substantially as follows: the pH increased 1.3 units from 5.7 to 7.3, the dissolved (0.45 μm-filtered) iron concentration decreased by 84% from 93 to 15 mg/l, the conductivity decreased by 379 μS/cm, and sulfate decreased by 78 mg/l. Electromagnetic induction surveys were conducted to identify AMD source material and monitor BST performance by measuring changes in subsurface resistivity throughout the site. These surveys revealed a treatment zone created between injection wells where the resistance of contaminated groundwater from up-gradient AMD sources increased as it flowed past injection wells, thus, suggesting this technique could be used to treat AMD sources directly or to intercept and neutralize sub-surface AMD. © 2007 Springer Science+Business Media B.V.