Evaluation of the impacts of seawater integration to electrocoagulation for the removal of pollutants from textile wastewater

Abstract

Recent textile industry expansion has a major environmental impact if not addressed. Being a water intensive industry, textile manufacturing is usually associated with wastewater management challenges. Electrocoagulation (EC) is recognized as one of the effective solutions to address these challenges. This study aims to investigate the potential of integrating seawater into the EC process for textile wastewater treatment, targeting optimal pollutant removal efficiencies. A simple electrolytic reactor was designed to investigate the removal efficiency of these treatments for chemical oxygen demand (COD), total suspended solids (TSS), turbidity, and color from textile wastewater at different seawater percentages and retention times. Notably, the addition of seawater not only improves the EC process efficiency but also significantly dilutes pollutants, reducing their concentrations. This dual effect enhances removal efficiency and dilution optimizes the treatment outcome. The highest removal efficiencies were achieved for COD (47.26%), TSS (99.52%), turbidity (99.30%), and color (98.19%). However, pH, dissolved oxygen (DO), and electrical conductivity increased with increasing retention times and seawater percentages in the EC process. Moreover, Seawater − EC integration reduces power usage to 15.769 Am−2 and costs approximately 0.20 USD/m3. To assess the effects of the retention times and seawater percentages on pollutant removal from textile wastewater, an analysis of variance (ANOVA) was conducted utilizing the Design-Expert 11 software. The best model obtained using Central Composite Design (CCD) was quadratic for COD (R2 = 0.9121), color (R2 = 0.9535), turbidity (R2 = 0.9525), and TSS (R2 = 0.9433). This study suggests that higher seawater percentages and longer retention times effectively eliminate contaminants but increase ion concentrations.