The results concerning emission of gases from two commercial graphite protective coatings for moulds and cores (water and alcoholic) are given in the hereby paper. Investigations were performed in two systems. One of the systems was corresponding to conditions occurring inside the mould cavity immediately after its pouring with liquid metal (Method 1), while the second was simulating conditions deep inside the mould at a certain distance from the casting (Method 2). Investigations were carried out in the CO2 atmosphere and in the air. The water protective coating generated 1.5 to 3 times larger volume of gases than the alcoholic coating (in dependence on the measuring method and atmosphere). The smallest differences occurred in the air atmosphere, while the largest in the CO2 atmosphere.
CITATION STYLE
Kmita, A., Drozyński, D., Mocek, J., Roczniak, A., Zych, J., & Holtzer, M. (2016). Gas Evolution Rates of Graphite Protective Coatings in Dependence on the Applied Solvent and Kind of Atmosphere. Archives of Metallurgy and Materials, 61(4), 2129–2134. https://doi.org/10.1515/amm-2016-0284
Mendeley helps you to discover research relevant for your work.