Dispersion of Carbon Nanotubes Improved by Ball Milling to Prepare Functional Epoxy Nanocomposites

Abstract

There has been an increase in interest in developing functional polymer composites based on green chemistry principles. The purpose of this study was to investigate the preparation of functional epoxy/carbon nanotube nanocomposites using ball milling methods. In contrast to mechanical mixing, ball milling promoted good dispersion of CNTs within the epoxy matrix, thereby improving their mechanical properties and electrical conductivity. In epoxy nanocomposites with ball milling, Young’s modulus and tensile strength were increased by 653% and 150%, respectively, when CNT loading was 1.0 vol%. Additionally, the ball milling of CNTs improves their dispersion, resulting in a low percolation threshold at 0.67 vol%. The epoxy/CNT film sensor that was produced using the ball milling approach not only exhibited high reliability and sensitivity to mechanical strains and impact loads, but also possessed the ability to self-detect damage, such as cracks, and accurately locate them. This study marks a notable milestone in the advancement of functional epoxy/CNT composites through the ball milling approach.