Optimization of Milling Procedures for Synthesizing Nano-CaCO3from Achatina fulica Shell through Mechanochemical Techniques

Abstract

The possibility of obtaining calcium carbonate nanoparticles from Achatina fulica shell through mechanochemical synthesis to be used as a modifying filler for polymer materials has been studied. The process of obtaining calcium carbonate nanopowders includes two stages: dry and wet milling processes. At the first stage, the collected shell was dry milled and undergone mechanical sieving to ≤50 μm. The shell particles were wet milled afterward with four different solvents (water, methanol, ethylene glycol, and ethanol) and washed using the decantation method. The particle size and shape were investigated on transmission electron microscopy, and twenty-three particle counts were examined using an iTEM image analyzer. Significantly, nanoparticle sizes ranging from 11.56 to 180.06 nm of calcium carbonate was achieved after the dry and wet milling processes. The size particles collected vary with the different solvents used, and calcium carbonate synthesis with ethanol offered the smallest organic particle size with the average size ranging within 13.48-42.90 nm. The effect of the solvent on the chemical characteristics such as the functional group, elemental composition, and carbonate ion of calcium carbonate nanopowders obtained from Achatina fulica shell was investigated. The chemical characterization was analyzed using Fourier transform infrared (FTIR) and a scanning electron microscope (SEM) equipped with an energy-dispersive spectroscope (EDX). The effect of milling procedures on the mechanical properties such as tensile strength, stiffness, and hardness of prepared nanocomposites was also determined. This technique has shown that calcium carbonate nanoparticles can be produced at low cost, with low agglomeration, uniformity of crystal morphology, and structure from Achatina fulica shell. It also proved that the solvents used for milling have no adverse effect on the chemical properties of the nano-CaCO3 produced. The loading of calcium carbonate nanoparticles, wet milled with different solvents, exhibited different mechanical properties, and nanocomposites filled with methanol-milled nano-CaCO3 offered superior mechanical properties.