Effect of bismuth oxide nanoparticle on the electromagnetic interference shielding and thermal stability of industrial waste based-geopolymer composites

Abstract

Gold mine tailings, fly ash, and bagasse ash has been repurposed to produce geopolymer (GP) with enhanced electromagnetic interference shielding efficiency (EMI-SE) and high thermal property. GP has low shielding efficiency compared to concrete. Due to this, an appropriate filler must be incorporated into its matrix to enhance its EMI-SE. For this study, bismuth oxide nanomaterial (BiNP) was utilized as the additive filler. The percent content of BiNP was varied to evaluate its influence on the EMI-SE of GP. Morphology shows that Bi2O3 was embedded in the matrix of GP, and no new aluminu-phyllosilicate minerals were formed. This indicates that some minerals acted only as internal fillers in the matrix. Compressive strength shows synthesized GP composites were more than 20 MPa, with neat GP reaching the maximum strength. Moreover, the EMI-SE of neat GP was 21.2 dB for 20–4500 MHz range. This indicates that GP alone has sufficient characteristics to attenuate EMI radiation. Addition of 5%, 10% and 15% weight of BiNP improves EMI-SE by 4–10%, with 5% BiNP shown to be the optimum ratio. Lastly, the addition of BiNP improves the thermal stability of GP. This study shows that GP incorporated with Bi2O3 can be recommended for small-scale construction and small residential building.