Enhanced Mass Transfer in Microbubble Driven Airlift Bioreactor for Microalgal Culture

  • Ying K
  • Al-Mashhadani M
  • Hanotu J
  • et al.
N/ACitations
Citations of this article
115Readers
Mendeley users who have this article in their library.

Abstract

In this study, the effect of microfluidic microbubbles on overall gas-liquid mass transfer (CO2 dissolution and O2 re-moval) was investigated under five different flow rates. The effect of different liquid substrate on CO2 mass transfer properties was also tested. The results showed that the KLa can be enhanced by either increasing the dosing flowrate or reducing the bubble size; however, increasing the flow rate to achieve a higher KLa would ultimately lower the CO2capture efficiency. In order to achieve both higher CO2 mass transfer rate and capture efficiency, reducing bubble size (e.g. using microbubbles) has been proved more promising than increasing flow rate. Microbubble dosing with 5% CO2gas showed improved KLa by 30% - 100% across different flow rates, compared to fine-bubble dosing. In the real algal culture medium, there appears to be two distinct stages in terms of KLa, divided by the pH of 8.4.

Cite

CITATION STYLE

APA

Ying, K., Al-Mashhadani, M. K. H., Hanotu, J. O., Gilmour, D. J., & Zimmerman, W. B. (2013). Enhanced Mass Transfer in Microbubble Driven Airlift Bioreactor for Microalgal Culture. Engineering, 05(09), 735–743. https://doi.org/10.4236/eng.2013.59088

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free