Design and Evaluation of a Novel Instrument Gripper for Handling of Surgical Instruments

Abstract

Introduction: Contaminated surgical instruments are manually prepared for cleaning and disinfection in the reprocessing unit for medical devices (RUMED). Manual labour exposes staff to the risk of infection and is particularly stressful at peak times due to the large volume of instruments. Partial automation of processes by a robot could provide a solution but requires a gripper that can handle the variety of surgical instruments. This paper describes the development and first evaluation of an instrument gripper. Methods: First, an analysis of gripping geometries on basic surgical instruments is carried out. Based on the identified common features and a review of the state of the art of gripper technology, the SteriRob gripper concept is developed. The concept is compared with a force closure gripper in a series of tests using seven criteria. Results: Both gripping approaches investigated can be used for handling surgical instruments in a pick-and-place process. However, the SteriRob gripper can transmit significantly higher acting forces and torques. In addition, the gripping process is more robust against deviations from the expected instrument position. Conclusion: Overall, it has been shown that the developed instrument gripper is suitable for about 60% of reusable surgical instruments due to the focus on horizontal cylindrical geometries. Because of the large possible force transmission, this gripping approach is particularly suitable for tasks in which the robot assists with cleaning processes.