Strength Performance of the Connection between Brick and SPF Lumber

3Citations
Citations of this article
6Readers
Mendeley users who have this article in their library.

Abstract

There are many ways to strengthen an unreinforced brick masonry wall. One of the strengthening methods applies timber, which is a lightweight and easy installation. The connection between the timber and the brick masonry wall plays an important role. In this study, the experimental and theoretical methods were investigated, and the pullout and shear strengths of the chemical anchor were employed as the connection between clay brick and SPF (spruce, pine, fir) lumber. Three bolt diameters (ø8, ø10, ø12 mm) were utilized in nine pullout tests and two types of eighteen shear tests. Four types of prediction models estimated the pullout strength of the chemical anchor. The European Yield Theory (EYT) expected the shear strength of the chemical anchor, involving six failure modes. The results of all experiments were discussed as failure mode, strength, and stiffness under monotonic load. Finally, the effective result of this study highlights A12 specimens using ø12 mm bolt and employing the epoxy resin in brick and lumber. The maximum pullout load of A12 specimens is 12.1 kN, and the yield shear load is 11.2 kN.

References Powered by Scopus

Behavior of chemically bonded anchors

155Citations
N/AReaders
Get full text

Learning from failure: Damage and failure of masonry structures, after the 2017 Lesvos earthquake (Greece)

139Citations
N/AReaders
Get full text

Shear transfer across a crack in reinforced high-strength concrete

116Citations
N/AReaders
Get full text

Cited by Powered by Scopus

A Study on the Influence of Bolt Arrangement Parameters on the Bending Behavior of Timber–Steel Composite (TSC) Beams

4Citations
N/AReaders
Get full text

Structural response of half-scale pumice concrete masonry building: shake table/ambient vibration tests and FE analysis

2Citations
N/AReaders
Get full text

Reinforced Effect on Brick Wall Using Timber Wall as a Retrofitting Method

2Citations
N/AReaders
Get full text

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Cite

CITATION STYLE

APA

Ganbaatar, A., Mori, T., Inoue, R., & Danzandorj, S. (2022). Strength Performance of the Connection between Brick and SPF Lumber. Buildings, 12(4). https://doi.org/10.3390/buildings12040465

Readers over time

‘23‘2401234

Readers' Seniority

Tooltip

Lecturer / Post doc 2

100%

Readers' Discipline

Tooltip

Engineering 2

100%

Article Metrics

Tooltip
Social Media
Shares, Likes & Comments: 92

Save time finding and organizing research with Mendeley

Sign up for free
0