Fotocatalizadores Pt/S-TiO2 obtenidos por Fotodeposición de Pt sobre S-TiO2 Sintetizado a partir de TiOSO4 a través del Método Integrado Sol-Gel/Solvotermal a bajas Temperaturas

  • Malo J
  • Mejía M
  • Marín J
N/ACitations
Citations of this article
12Readers
Mendeley users who have this article in their library.

Abstract

Resumen Materiales fotoactivos tipo Pt/S-TiO 2 fueron obtenidos por fotodeposición de Pt sobre el fotocatalizador S-TiO 2 sintetizado a partir de oxisulfato de titanio (TiOSO 4) usando el método integrado sol-gel/solvotermal a bajas temperaturas (250 °C). La fotodeposición se realizó variando la concentración de platino en 0.2% y 0.5% en peso empleando dos tiempos de residencia de 60 min y 120 min. Las propiedades de los materiales fueron determinadas a través de análisis de DRX, Raman, XRF, FTIR-ATR, XPS, UV-vis/DRS, SEM, EDX, TEM, área superficial y porosidad. Los materiales obtenidos fueron mesoporosos y cristalizaron en fase anatasa, con incorporaciones de 0.31% en peso de S y 85% del valor nominal de Pt, presentando absorción y fotoactividad tanto en radiación ultravioleta como visible. El material preparado con mayor contenido de Pt y tiempo de fotodeposición, 0.5/120 Pt/S-TiO 2 , alcanzó la mayor fotoactividad en UV y visible en la decoloración de naranja de metilo en fase líquida. Abstract Photoactive materials Pt/S-TiO 2 were obtained by photodeposition of Pt on S-TiO 2 photocatalyst synthesized from titanium oxysulfate (TiOSO 4) using the integrated method sol-gel/solvothermal at low temperatures (250°C). The photodeposition was performed changing platinum concentration by 0.2% and 0.5% w/w and using two residence times of 60 min and 120 min. The properties of materials were determined by analysis of DRX, Raman, XRF, FTIR-ATR, XPS, UV-vis/DRS, SEM, EDX, TEM, surface area and porosity. The obtained materials were mesoporous and crystallized as anatase phase, incorporating 0.31% of S (by weight) and 85% of the nominal Pt value, showing absorption and photoactivity in both ultraviolet and visible radiation. The material prepared with higher Pt content and longer photodeposition time, 0.5/120 Pt/S-TiO 2 , reached the highest UV and visible photoactivities in the degradation of methyl orange in the liquid phase.

Cite

CITATION STYLE

APA

Malo, J. E., Mejía, M. I., & Marín, J. M. (2018). Fotocatalizadores Pt/S-TiO2 obtenidos por Fotodeposición de Pt sobre S-TiO2 Sintetizado a partir de TiOSO4 a través del Método Integrado Sol-Gel/Solvotermal a bajas Temperaturas. Información Tecnológica, 29(4), 97–100. https://doi.org/10.4067/s0718-07642018000400097

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free