GNSS-SDR pseudorange quality and single point positioning performance assessment

Abstract

In recent years, we have witnessed a growing demand for GNSS receiver customization in terms of modification of signal acquisition, tracking, and processing strategies. Such demands may be addressed by software-defined receivers (SDRs) which refers to an ensemble of hardware and software technologies and allows re-configurable radio communication architectures. The crux of the SDRs is the replacement of the hardware components through software modules. In this paper, we assess the quality of GNSS observables acquired by SDR against the selected u-blox low-cost receiver. In the following, we investigate the performance level of single point positioning that may be reached with an ultra-low-cost SDR and compare it to that of the low-cost GNSS receiver. The signal quality assessment revealed a comparable performance in terms of carrier-to-noise density ratio and a significant out-performance of the u-blox over SDR in terms of code pseudorange noise. The experimentation in the positioning domain proved that software-defined receivers may offer a position solution with three-dimensional standard deviation error at the level of 5.2 m in a single point positioning mode that is noticeably poorer accuracy as compared to the low-cost receiver. Such results demonstrate that there is still room for SDR positioning accuracy improvement.