Hybrid Manufacturing of Acrylonitrile Butadiene Styrene (ABS) via the Combination of Material Extrusion Additive Manufacturing and Injection Molding

Abstract

Acrylonitrile Butadiene Styrene (ABS) is a common thermoplastic polymer that has been widely employed in the manufacturing industry due to its impact resistance, tensile strength, and rigidity. Additive manufacturing (AM) is a promising manufacturing technique being used to manufacture products with complex geometries, but it is a slow process producing mechanically inferior products when compared to traditional production processes like injection molding (IM). Thus, our hybrid manufacturing (HM) process combining materials extrusion AM and IM to create a single article was investigated in this study, in which eleven batches of specimens were made and extensively tested. These include the AM, IM, and hybrid manufactured (HYM) samples, in which the HYM samples were made by inserting AM substrates into the IM tool and were varied in infill density of AM preforms and geometries. The HYM samples outperformed AM parts in terms of mechanical performance while retaining customizability dependent on the HYM processing parameters, and the best mechanical performance for HYM samples was found to be comparable to that of IM samples, implying that the overmolding process in HM had primarily improved the mechanical performance of AM products. This work leads to a deeper knowledge of applications to confirm the optimal component fabrication in high design flexibility and mass production.