A laboratory study using maple leaves as a biosorbent for lead removal from aqueous solutions

Abstract

This study tested the ability of maple leaf powder (MLP) to reduce the level of Pb(II) ions in aqueous solutions. As a biosorbent, MLP has a larger specific surface area (10.94 m2/g) and contains Pb(II) binding functional groups. The highest Pb(II) removals were achieved at pH of 6.2, particle size of less than 75 μm, dose of 0.5 g, initial concentration of 10 mg/l and equilibrium time of >15 minutes. Thermodynamic results indicated that the Pb(II) adsorption process was spontaneous and exothermic. MLP biosorbent could be reused for five cycles after successfully recovery by 0.1N H2SO4. Both adsorption and desorption data fit well with Langmuir and Sips isotherm models (R2 ≈ 0.961-1.00). The Pb(II) adsorption and desorption capacities (qm) of MLP were up to 50.27 mg/g and 40.06 mg/g, respectively, for a 1 g dose at room temperature. Kinetics processes were rate controlling step and showed good fitness with the pseudo-second order and intraparticle diffusion models. Results suggest that multiple mechanisms (chelating bond, physisorption and chemisorption) are involved to adsorb the Pb(II) ions on to MLP. Higher Pb(II) removal revealed the practical applicability of MLP in water and wastewater treatment systems. © IWA Publishing 2014.