Electrical Characterization of Epoxy Nanocomposite under High DC Voltage

Abstract

This work studies the direct current breakdown characteristics of unfilled epoxy and epoxy nonconductive nanocomposites ((Formula presented.) and (Formula presented.)). It also examines the variation of electrical properties in epoxy nanocomposites. The novel aspect of this study is that the samples of Epoxy nanocomposite were exposed to high voltages of up to six kilo volts for three hours using field electron microscopy under high vacuum conditions ((Formula presented.) mbar). The current emitted from these samples was measured at three different intervals of time. In addition, the influence of high voltage on the permittivity, loss factor (tan(δ)), and conductivity of the epoxy nanocomposite was studied. This evaluation was conducted before and after applying the voltage at room temperature, The frequency range extends from (Formula presented.) – (Formula presented.) Hz using the Novo Control Alpha-A analyzer. Current–voltage characterization was performed through field electron microscopy. The samples were characterized by scanning electron microscopy–energy dispersive X-ray spectroscopy and Fourier Transform Infrared Spectroscopy. The unfilled epoxy exhibited structural degradation, resulting in the formation of holes when exposed to high voltages of up to six kilo volts, leading to a reduction in electrical properties. Nevertheless, the addition of nanoparticles shows a significant increase in the operational lifetime of the epoxy nanocomposite. The degree of increase in the lifetime of epoxy composite varied depending on several factors such as the type of NPs introduced and their respective sizes. The epoxy/ (Formula presented.) nanocomposite comparing with epoxy/MgO and epoxy/ (Formula presented.) nanocomposite showed elevated resistance to direct current breakdown strength and maintaining its dielectric.