Effect of high loading of titanium dioxide particles on the morphology, mechanical and thermo-mechanical properties of the natural rubber-based composites

Abstract

The aim of this work was to prepare and characterize the natural rubber vulcanizates containing different amounts of titanium dioxide particles. At first, a rubber mixture was prepared using a laboratory two-roll mill and then samples were vulcanized by a hydraulic press. The formulation of the rubber mixture and rubber-processing technique were based on our earlier investigations. Samples were obtained with different titanium dioxide loadings of 15, 25, 45, and 85 parts by weight per hundred parts of natural rubber. This research is focused on the determination of the influence of different loadings of titanium oxide particles on the chemical structure, morphology, mechanical and thermo-mechanical properties of the natural rubber-based composites. It was found that vulcanizates with different amounts of TiO2 particles possess good characteristic in terms of all measured properties. The results of Fourier transform infrared spectroscopy analysis showed that the chemical structure of the obtained natural-based composites was not influenced by titanium dioxide particles. The SEM micrographs showed the uniform dispersion of TiO2 particles in the natural rubber matrix. The agglomeration of filler was seen at the higher contents of TiO2 in the matrix. The thermogravimetric analysis showed slightly different thermal stability for the obtained natural rubber composites. The dynamic mechanical thermal analysis showed that the prepared materials have similar glass transition temperatures. However, increase in the content of titanium dioxide in the obtained materials is connected with higher energy loss (higher dissipation of energy) during the mechanical work of material and higher cross-link density of the prepared materials.