A Hybrid Wavelet-Based Method for the Peak Detection of Photoplethysmography Signals

15Citations
Citations of this article
37Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

The noninvasive peripheral oxygen saturation (SpO2) and the pulse rate can be extracted from photoplethysmography (PPG) signals. However, the accuracy of the extraction is directly affected by the quality of the signal obtained and the peak of the signal identified; therefore, a hybrid wavelet-based method is proposed in this study. Firstly, we suppressed the partial motion artifacts and corrected the baseline drift by using a wavelet method based on the principle of wavelet multiresolution. And then, we designed a quadratic spline wavelet modulus maximum algorithm to identify the PPG peaks automatically. To evaluate this hybrid method, a reflective pulse oximeter was used to acquire ten subjects' PPG signals under sitting, raising hand, and gently walking postures, and the peak recognition results on the raw signal and on the corrected signal were compared, respectively. The results showed that the hybrid method not only corrected the morphologies of the signal well but also optimized the peaks identification quality, subsequently elevating the measurement accuracy of SpO2 and the pulse rate. As a result, our hybrid wavelet-based method profoundly optimized the evaluation of respiratory function and heart rate variability analysis.

Cite

CITATION STYLE

APA

Li, S., Jiang, S., Jiang, S., Wu, J., Xiong, W., & Diao, S. (2017). A Hybrid Wavelet-Based Method for the Peak Detection of Photoplethysmography Signals. Computational and Mathematical Methods in Medicine, 2017. https://doi.org/10.1155/2017/9468503

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free