Influence of additional methanol on both pre- And post-denitrification processes in treating municipal wastewater

Abstract

Changes in functional properties of biological denitrification in the long-term use of methanol were explored in both pre- and post-denitrification processes. The two systems employed were sequencing batch reactor (SBR) using post-denitrification in temporal sequence, and Carrousel oxidation ditch, which was equipped with a separate pre-denitrification zone. In the SBR, stable nitrate reduction rates reached after 37 days elapsed with addition of methanol (TOC/N ¼ 1.4–1.8) at the start of anoxic phase, and specific denitrification rate increased from 0.378 mgNOx-N·(gVSS·h)1 to 2.406 mgNOx-N·(gVSS·h)1. Besides, by means of nitrogen uptake rate (NUR) batch tests based on methanol-adapted sludge, the appropriate range of TOC/N ratios for complete denitrification was estimated to be 1.10–2.68. By comparison, the Carrousel oxidation ditch that was fed with methanol in the anaerobic zone took fewer days (29 days) to obtain a constant effluent nitrate. Moreover, the denitrification yield in ditch was elevated from an initial value of 0.082 mgTN/mgCOD to 0.123 mgTN/mgCOD, and the nitrogen removal efficiency reached up to a level of 68%. The focus on denitrification potential with external methanol is valuable to provide information for developing carbon dosage control, as well as predict the nitrate effluent quality of the plant.