Substrate-dependent post-annealing effects on the strain state and electrical transport of epitaxial La5/8-yPryCa 3/8MnO3 films

Abstract

Large scale electronic phase separation (EPS) between ferromagnetic metallic and charge-ordered insulating phases in La5/8-yPr yCa3/8MnO3 (y = 0.3) (LPCMO) is very sensitive to the structural changes. This work investigates the effects of post-annealing on the strain states and electrical transport properties of LPCMO films epitaxially grown on (001)pc SrTiO3 (tensile strain), LaAlO3 (compressive strain) and NdGaO3 (near-zero strain) substrates. Before annealing, all the films are coherent-epitaxial and insulating through the measured temperature range. Obvious change of film lattice is observed during the post-annealing: the in-plane strain in LPCMO/LAO varies from -1.5% to -0.1% while that in LPCMO/STO changes from 1.6% to 1.3%, and the lattice of LPCMO/NGO keeps constant because of the good lattice-match between LPCMO and NGO. Consequently, the varied film strain leads to the emergence of metal-insulator transitions (MIT) and shift of the critical transition temperature in the electrical transport. These results demonstrate that lattice-mismatch combined with post-annealing is an effective approach to tune strain in epitaxial LPCMO films, and thus to control the EPS and MIT in the films. © 2014 Author(s).