Surface Modification of Polyester/Viscose Fabric with Silica Hydrosol and Amino-Functionalized Polydimethylsiloxane for the Preparation of a Fluorine-Free Superhydrophobic and Breathable Textile

Abstract

This work attempted to fabricate superhydrophobic fabric via a simple immersion technique. Textile fabrics were coated with silica nanoparticles prepared from tetraethoxysilane (TEOS) to obtain sufficient roughness with hydrophobic surface chemistry. Then, the coated fabrics were treated with polydimethylsiloxane (PDMS) and aminopropyltriethoxysilane (APTES) to reduce the surface energy. The effects of the PDMS concentration on the surface morphology and superhydrophobicity of as-prepared fabric were investigated. The morphology and the composition of superhydrophobic fabric were characterized by scanning electron microscopy (SEM), energy dispersive X-ray (EDS), and Fourier transform infrared (FTIR) spectroscopy. The results revealed the formation of spheri-cal silica nanoparticles with an average particle size of 250 nm throughout the fabric surface. The possible interactions between silica nanoparticles and APTES, as well as the fabrics, were elucidated. Investigating the hydrophobicity of fabrics via water contact angle (WCA) measurement showed that the treated fabric exhibits excellent water repellency with a water contact angle as high as 151◦ and a very low water sliding angle. It was also found that the treated fabric maintained most of its hydrophobicity against repeated washing, as the WCA of superhydrophobic fabrics decreased to 141◦ after 25 repeated washing cycles. The comfort properties of the obtained superhydrophobic fabrics in terms of air permeability and bending length did not reveal any significant changes.