Energy balance and local unsteady loss analysis of flows in a low specific speed model pump-turbine in the positive slope region on the pump performance curve

Abstract

The positive slope on the pump performance curve of pump-turbines suggests potential operational instabilities in pump mode. Previous research has indicated that the increase of the hydraulic loss caused by sudden changes of flow patterns in pump-turbines is responsible for the positive slope, however its detailed flow mechanism is still unclear. A low specific speed model pump-turbine was numerically investigated against experiments in the present study, by applying unsteady RANS (Reynolds-Averaged Navier–Stokes equations) simulations with a v2-f turbulence model. The mechanism of occurrence of the positive slope on the pump performance curve was discussed regarding the energy balance, as this region appears when the value of ∂∂PQuis larger than the critical value PQu. An unsteady local loss analysis, derived from the energy equation, was conducted to illustrate the contribution of local flow patterns to the loss in corresponding hydraulic components. The variation of the kinetic energy of the mean flow was taken into account for the first time so that this method can be applied to highly time dependent flow patterns, e.g., a rotating stall in the present study. The investigations on the flow patterns revealed that some guide vane channels stalled with a larger discharge coefficient than the positive slope region. Several guide vane channels near the stalled channels were stalling with minor decrease of the discharge coefficient, leading to sudden increases of the input power and the loss. When the discharge coefficient slightly decreased in further, the pump-turbine operated into the positive slope region, and the rotating stall with 3 stall cells appeared, proven by the FFT (Fast Fourier Transform) and cross-phase analysis on the pressure fluctuations.