This paper focuses on the improvement of a combined impregnation process (CIP, also known as the Royal process). This treatment combines the protective properties of a wood protection agent and the hydrophobic properties of a subsequent oil treatment in a wood product. Copper-based wood preservatives, which are traditionally used in CIP, are very effective but their long-term future use is questionable because of environmental concerns, especially the toxicity against water-living organisms. There is a need for new environmentally friendly wood preservative systems for a use in CIP. The substitutes for copper used in this study are natural polymers and organic biocides. The aim of this research is to describe the fixation effectiveness of the following compounds: Chitosan, Propiconazole, Wolmanit CX-8, Tannin, fire protection agent, Alginate. The scots pine sapwood samples (50×25×15) mm were impregnated and oil treated. The treated products were analysed for their preservative-and oil-retention. Preservative fixation time influence on oil treatment was tested. The treated samples were leached according to EN84. Water samples were analyzed for the amount of active ingredient.
CITATION STYLE
Liibert, L., Treu, A., & Meier, P. (2011). The fixation of new alternative wood protection systems by means of oil treatment. Medziagotyra, 17(4), 402–406. https://doi.org/10.5755/j01.ms.17.4.777
Mendeley helps you to discover research relevant for your work.