Methods for reducing biofouling of moored optical sensors

Abstract

Biofouling is one of the primary limiting factors in terms of measurement accuracy and deployment longevity for oceanographic studies involving autonomous sampling. Copper can significantly reduce marine fouling for long-term optical sensor deployments in coastal and open-ocean environments. Copper can effectively replace previously used highly toxic chemical antifoulant methods. Copper-based antifouling systems can be employed with three types of optical sensors: 1) open, 2) enclosed or semienclosed, and 3) shuttered. Copper plates on open-faced backscattering sensors can enable deployment periods of longer than 60 days in coastal waters without biofouling. In addition, copper tubing on nine-wavelength absorption-attenuation meters (ac-9s) has extended measurement capabilities from about 10 days to greater than 60 days with no signs of biofouling in coastal waters. Implementation of copper shutters on optical sensors in open-ocean waters off Japan has resulted in extended deployment periods (410 days and possibly longer) for optical measurements whereas previous optical measurements in the open ocean were typically degraded within several weeks to at most a few months due to biofouling. © 2004 American Meteorological Society.