P-type conductivity and suppression of green luminescence in Mg/N co-implanted GaN by gyrotron microwave annealing

Abstract

Co-implantation of Mg with N has been shown to improve p-type conductivity in Mg-implanted GaN. Achievement of p-type material still requires temperatures beyond the thermodynamic stability of GaN, however. In this study, we present results of implantation and anneal activation of GaN, co-implanted with Mg and N or Mg only by repeated, short thermal cycles of 1350 °C using a high-power gyrotron microwave source with a quasi-gaussian intensity profile. Spatial variations in optical and electrical properties of the resulting films are characterized by photoluminescence and diode I-V and C-V measurements. Resistive Mg/N co-implanted and annealed material shows dominant luminescence of the VN-related green luminescence (GL2) band at 2.37 eV and relatively lower intensity acceptor-related ultraviolet luminescence (UVL) at 3.27 eV. However, a material showing p-n diode behavior shows higher-intensity UVL luminescence and suppression of the GL2 band, permitting observation of the yellow luminescence (YL) present in the as-grown GaN. The YL is attributed to unintentionally introduced CN-ON complexes and is commonly observed in GaN grown by metalorganic chemical vapor deposition but is typically absent in implanted/annealed GaN. Co-implanted material is compared to material implanted only with Mg and annealed under the same conditions, which shows p-type activation, but contains persistent GL2 luminescence post-anneal and lowers maximum hole concentration.