Feasibility of backscatter communication using LoRAWAN signals for deep implanted devices and wearable applications

12Citations
Citations of this article
23Readers
Mendeley users who have this article in their library.

Abstract

This paper presents a method for low data rate transmission for devices implanted in the body using backscattered Long Range (LoRa) signals. The method uses an antenna loaded with a switch that changes between two load impedances at the rate of a modulating oscillator. Consequently, the LoRa signal transmitted by a LoRa node is reflected in the adjacent channels and can be detected with a LoRa gateway tuned to the shifted channels. A prototype developed to operate at Medical Implant Communication Service (MICS) and the Industrial Scientific and Medical (ISM) 433 MHz band is presented. The prototype uses a commercial ceramic antenna with a matched network tuned to the frequency band with high radiation efficiency. The effect of the coating material covering the antenna was studied. Simulated and experimental results using a phantom show that it is feasible to read data from deep implanted devices placed a few meters from the body because of the high sensitivity of commercial LoRa receivers.

Cite

CITATION STYLE

APA

Lazaro, M., Lazaro, A., & Villarino, R. (2020). Feasibility of backscatter communication using LoRAWAN signals for deep implanted devices and wearable applications. Sensors (Switzerland), 20(21), 1–26. https://doi.org/10.3390/s20216342

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free