Perpendicular ultrasound velocity measurement by 2D cross correlation of RF data. Part B: Volume flow estimation in curved vessels

Abstract

A novel axial velocity profile integration method, obtained from ultrasonic perpendicular velocimetry, for flow estimation in curved tubes was validated. In an experimental set-up, physiologically relevant curved geometries and flows were considered. Axial velocity profile measurements were taken by applying particle imaging velocimetry-based methods to ultrasound data acquired by means of a linear array transducer positioned perpendicular to the axial velocity component. Comparison of the assessed asymmetric velocity profiles to computational fluid dynamics calculations showed excellent agreement. Subsequently, the recently introduced cos θ-integration method for flow estimation was compared to the presently applied Poiseuille and Womersley models. The average deviation between the cos θ-integration-based unsteady flow estimate and the reference flow was about 5%, compared to an average deviation of 20% for both the Poiseuille and Womersley approximation. Additionally, the effect of off-centre measurement was analysed for the three models. It was found that only for the cos θ-integration method, an accurate flow estimation is feasible, even when it is measured off centre. © 2010 The Author(s).