Flotability improvement of ilmenite using attrition-scrubbing as a pretreatment method

27Citations
Citations of this article
21Readers
Mendeley users who have this article in their library.

Abstract

Flotation technology of the recovery and utilization of ilmenite from tailings of iron beneficiated in Panzhihua was investigated based on mineralogical study. The results of mineralogical study show that the main occurrence of the valuable mineral are liberated grains of ilmenite. Experimental results of flotation conditions show that attrition-scrubbing raw ores exhibit good flotability with higher recoveries and a slight decrease in grade compared to ores without attrition-scrubbing. Further, open-circuit experiments also prove the superiority of attrition-scrubbing raw ores. The results of closed-circuit experiments show that qualified ilmenite concentrate can be obtained and the yield, grade, and recovery are 22.26%, 47.06%, and 60.73%, respectively. Theoretical study and analysis show that there are two contributions to superior flotability for attrition-scrubbing samples. The first is that the attrition-scrubbing samples can uncover more ferrous ions on the newly-produced fresh ilmenite surface, resulting in the increase in active sites. The other is that in the process of attrition-scrubbing, the transformation of ferrous ions to ferric ions can be promoted.

Cite

CITATION STYLE

APA

Zhai, J., Chen, P., Wang, H., Hu, Y., & Sun, W. (2017). Flotability improvement of ilmenite using attrition-scrubbing as a pretreatment method. Minerals, 7(1). https://doi.org/10.3390/min7010013

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free