Study of grain distribution during friction stir welding of Al-Zn-Mg alloys using numerical simulation

Abstract

During friction stir welding (FSW) of Al-Zn-Mg alloys, the grain size of the welded material significantly affects its mechanical properties. In this study, the FSW process was simulated using the finite element method (FEM). Subsequently, the Zener-Hollomon parameters and grain size were calculated using the results of the stimulation of the temperature and strain rate fields. Also, the accuracy of numerical simulation was proved by experiments. It was found that the Zener-Hollomon relationship correctly predicted the grain size for the weld stirring zone (SZ) and thermal-mechanical affected zone (TMAZ), and we concluded that low rotating and high welding speeds resulted in smaller grain sizes for the SZ. Moreover, the high welding speed could effectively improve the grain condition at the edge of the TMAZ and the specific relationship between Zener-Hollomon parameters and the average grain diameter of SZ can be expressed as: Z = 9.09 ? 1013 d -4.74.