Review on Per-and Poly-Fluoroalkyl Substances’ (PFASs’) Pollution Characteristics and Possible Sources in Surface Water and Precipitation of China

Abstract

In recent years, due to the production and use of per-and poly-fluoroalkyl substances (PFASs), the research on the pollution characteristics and sources of PFASs in surface water and precipitation in China has attracted increasing attention. In this study, the related published articles with sampling years from 2010 to 2020 were reviewed, and the concentration levels, composition characteristics and possible sources of PFASs in surface water (rivers and lakes) and precipitation in China were summarized, including those in the Tibetan Plateau region. The results show that the concentrations of PFASs in surface water in different areas of China vary greatly, ranging from 0.775 to 1.06 × 106 ng/L. The production processes of fluorinated manufacturing facilities (FMFs) and sewage discharge from wastewater treatment plants (WWTPS) were the main sources of PFASs in surface water in China, and the concentrations of PFASs in water flowing through cities with high urbanization increased significantly compared with those before water flowed through cities with high urbanization. The compositions of PFASs in surface water gradually changed from long-chain PFASs, such as per-fluoro-octanoic acid (PFOA) and per-fluoro-octanesulfonic acid (PFOS) to short-chain PFASs, such as per-fluorobutanoic acid (PFBA), per-fluorobutanesulfonic acid (PFBS), perfluorohexanoic acid (PFHxA) and per-fluoropentanoic acid (PFPeA). The concentrations of PFASs in precipitation in China ranged from 4.2 to 191 ng/L, which were lower than those of surface water. The precipitation concentrations were relatively high around a fluorination factory and in areas with high urbanization levels. PFASs were detected in the surface water and precipitation in the Tibetan Plateau (TP), which is the global “roof of the world”, but the concentrations were low (0.115–6.34 ng/L and 0.115–1.24 ng/L, respectively). Local human activities and surface runoff were the main sources of PFASs in the surface water of the Tibetan Plateau. In addition, under the influence of the Southeast Asian monsoon in summers, marine aerosols from the Indian Ocean and air pollutants from human activities in Southeast Asia and South Asia will also enter the water bodies through dry and wet depositions. With the melting of glaciers caused by global warming, the concentration of PFASs in the surface water of the TP was higher than that before the melting of glaciers flowed into the surface water of the TP. Generally, this study summarized the existing research progress of PFAS studies on surface water and precipitation in China and identified the research gaps, which deepened the researchers’ understanding of this field and provided scientific support for related research in the future. The concentrations of PFASs in the water bodies after flowing through FMFs were significantly higher than those before water flowed through FMFs, so the discharge of the FMF production process was one of the main sources of PFASs in surface water.