Influenceregulator onof thethe dolomiteph hydrophobization process

Abstract

A study was carried out to investigate the combined effect of released ions in the pulp by pH regulator and mineral surface on dolomite flotation. The tests were carried out using a dolomite sample in a bench flotation cell with automatic froth remover. Zeta potential measurements, solution conductivity and FTIR analysis were done to support the interpretation of the results. The main reagents used for pH adjustment in the alkaline range (calcium hydroxide, sodium hydroxide, and sodium carbonate) were compared using amine or sodium oleate as collector. Dolomite is a sparingly soluble-type calcium mineral (as calcite, apatite, fluorite and scheelite), releasing different amounts of calcium and magnesium ions in the pulp. Amine adsorbs mainly by a chemical complexation mechanism between the molecular specie RNH2 with calcium and magnesium ions present on the dolomite surface. In this system calcium hydroxide must be used because in addition to adjusting the pH it is a calcium ion supplier, thus increasing the collector adsorption. In turn, in the dolomite flotation with oleate, the pH must be regulated with soda ash that precipitates Ca2+ and Mg2+ as carbonate allowing for higher adsorption of the collector.