Effect of Ag modification on TiO2 and melem/g-C3N4 composite on photocatalytic performances

Abstract

Here, the comparison of two different semiconductor materials is demonstrated, TiO2 and melem/g-C3N4 composites—modified with balls of approximately 5 nm Ag nanoparticles (NPs) as photocatalysts for the degradation of the model dye acid orange 7 (AO7). The melem molecule synthesized here is one of a series of organic compounds consisting of triazine ring compounds with a structure similar to that of melam and melamine. The photodegradation process of AO7 was carried out to examine all powder materials as a potential photocatalyst. Additionally, two different lamps of wavelengths 368 nm (UV light) and 420 nm (VIS light) were applied to compare the photodegradation tests. A new synthesis route for the acquisition of Ag NPs (Ag content 0.5, 1.0 and 2.5 wt%), based on a wet and low temperature method without the use of reducing reagents was proposed. The best photocatalytic performances under UV and VIS light were obtained for both, TiO2 and melem/g-C3N4 materials (new synthesis route) modified with a very low Ag content—0.5 wt%. The photodegradation activities using UV lamp (3 h, 368 nm irradiation) for samples with 0.5 wt% of Ag: TiO2 and melem/g-C3N4, in excess of 95 and 94%, respectively, were achieved. The highest photoactive materials melem/g-C3N4 with 0.5 and 1 wt% Ag revealed 98% of activity under the VIS lamp after 3 h long irradiation. Our work demonstrates a novel, environmentally acceptable, and cost-effective chemical strategy for preparation of photocatalysts suitable for degradation of organic contaminants in wastewater treatment.