The Split Flow Process of CO2 Capture with Aqueous Ammonia Using the eNRTL Model

0Citations
Citations of this article
13Readers
Mendeley users who have this article in their library.

Abstract

Carbon Capture and Storage (CCS) technology has attracted increasing attention as global climate change accelerates. Carbon dioxide removal processes under development include pressure swing adsorption (PSA) and chemical absorption using amine solvents. In this paper, an ammonia solvent, which is relatively inexpensive and has good material properties, was used instead of amines in the carbon dioxide removal process simulation as a chemical absorption method. This simulation used the eNRTL thermodynamics model which has the advantage of predicting ions in the liquid phase in Aspen Plus. A case study (Case Study 1) was conducted to verify the validity of the thermodynamic model. The purpose of this research was to find the operating conditions to eliminate more than 90% of the carbon dioxide contained in the flue gas from coal-fired power stations, and to lower heat duty and operating cost conditions. A second case study (Case Study 2) was conducted to find the operating conditions by comparing various process operating conditions. Additionally, this paper determined lower operating cost conditions by manipulating the amount of steam and cooling water. The results showed that the heater’s outlet temperature should be set at under 80 ℃ to lower the operating costs. As a result of changing the flow rate of the side stream of the split flow process, energy consumption was reduced when compared to the conventional flow process. It was shown that the split flow is a superior process with 10.24% less energy use than the conventional flow. In this study, the split flow process achieved an energy saving advantage when compared to the conventional flow process, and a carbon dioxide removal rate of 95% was achieved.

Cite

CITATION STYLE

APA

Jeong, S. W., Lee, B., & Kim, S. Y. (2022). The Split Flow Process of CO2 Capture with Aqueous Ammonia Using the eNRTL Model. Processes, 10(9). https://doi.org/10.3390/pr10091839

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free