Characterization of timber masonry walls with dynamic tests

Abstract

Most of the Lisbon 18th century timber-framed masonry “Pombalino” buildings currently need seismic rehabilitation due to: (i) natural degradation with aging; (ii) need for adaptation to new serviceability requirements, generally involving higher loads and consequent structural changes; (iii) former interventions with elimination or damage of structural elements, affecting seismic resistance and (iv) noncompliance with the present seismic codes. The research presented in this paper aimed at experimentally evaluating the seismic vulnerability of the “Pombalino” buildings and at proposing a strengthening technique to reduce it by reinforcing their timber framed “Frontal” walls. The experimental program was based on extensive dynamic testing on prototype representative of the current characteristic of “Frontal” walls. The results of the dynamic tests carried out in the LNEC 3D shaking table are presented regarding the two types of tests performed: (a) seismic tests, in which the seismic action was applied with increasing amplitude in the direction of the walls; (b) dynamic identification tests, aiming at evaluating the decrease of the mechanical properties of the models. A comparison of the performance of the non-strengthened and strengthened tested prototypes is also presented.