Sustainable lighting-retrofit versus dedicated luminaires-light versus power quality

Abstract

For the next few years millions of fluorescent luminaires will become waste and will be replaced by light-emitting diodes-LED luminaires. According to the Cost European Cooperation in Science & Technology Program, the next step will be shifting from sustainability to regeneration (enabling social and ecological systems to maintain a healthy state and to evolve); to reach this point, a is circular economy becomes necessary. The Technical University of Cluj-Napoca's Lighting Engineering Laboratory-LEL-is the main lighting independent consultant in Transylvania (the north-west region of Romania). For the Building Services Faculty, LEL adopted different energy efficient lighting solutions to replace existing fluorescent T8 luminaires. The best available techniques were evaluated over the last few years. Out of a range of different smart lighting control systems, LED were chosen and used for retrofitting the existing T8 luminaires or simply replacing them with new dedicated LED luminaires. The study analyzed five different lighting setups for upgrading the existing fluorescent T8 2 36W luminaires. One setup used T5 lamps and the others used retrofitted or dedicated LED lighting solutions. First the lighting quantities of each setup were evaluated under real and experimental conditions. Second, a programable power source was used for measuring power quality indicators corelated with the provided lighting outputs, under different voltage values and waveforms. For each lighting setup, an even and odd current harmonic limit check was performed in line with class C-lighting equipment, IEC 61000-3-2 requirements. A new energy efficiency and power quality indicator was proposed-the lighting apparent power density [VA/sq.m/100lx].