Comparison of CO 2 vertical profiles in the lower troposphere between 1.6 µm differential absorption lidar and aircraft measurements over Tsukuba

5Citations
Citations of this article
6Readers
Mendeley users who have this article in their library.

Abstract

A 1.6 µm differential absorption Lidar (DIAL) system for measurement of vertical CO 2 mixing ratio profiles has been developed. A comparison of CO 2 vertical profiles measured by the DIAL system and an aircraft in situ sensor in January 2014 over the National Institute for Environmental Studies (NIES) in Tsukuba, Japan, is presented. The DIAL measurement was obtained at an altitude range of between 1.56 and 3.60 km with a vertical resolution of 236 m (below 3 km) and 590 m (above 3 km) at an average error of 1.93 ppm. An in situ sensor for cavity ring-down spectroscopy of CO 2 was installed in an aircraft. CO 2 mixing ratio measured by DIAL and the aircraft sensor ranged from 398.73 to 401.36 ppm and from 399.08 to 401.83 ppm, respectively, with an average difference of −0.94 ± 1.91 ppm below 3 km and −0.70 ± 1.98 ppm above 3 km between the two measurements.

Cite

CITATION STYLE

APA

Shibata, Y., Nagasawa, C., Abo, M., Inoue, M., Morino, I., & Uchino, O. (2018). Comparison of CO 2 vertical profiles in the lower troposphere between 1.6 µm differential absorption lidar and aircraft measurements over Tsukuba. Sensors (Switzerland), 18(11). https://doi.org/10.3390/s18114064

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free